Why wait 24 hours near the oven? MRC moisture balances series suitable for a wide range of applications. These balances are target to determine the moisture parentage at the sample when the operative principle is based on evaporation and precise weight. The balance will weigh and heat the sample which will cause the water to evaporate and the sample mass will lose some weight. The balance has an automatic weight for each period of time (adjustable) and automatically declares the moisture percentages at the sample.
Application of moisture balances:
- Product Quality Assurance
- Develop and manufacturing process
- Determine moisture percentage at food Such as: wheat, corn, butter, milk, bread etc.
- Determine moisture percentage at powder and drugs
- Determine moisture percentage at sand for the needs of plumbing and structure leaks
The moisture balance will be a convenient and useful substitute rather than weight the sample, dry it in the oven and weight again, finally calculate the results independently.
Uses of moisture balances:
Moisture scales are used to determine moisture levels in chemicals, medicines, food products, grains, wood, soils and sludge. Moisture directly affects product quality as well as research applications.
What to consider when choosing moisture scales/moisture balances
When buying a moisture balance, the most important considerations are capacity, weighing readability, moisture readability and reproducibility. The capacity decision is based on the amount of matter you need to weigh at a given time. It is important to understand that Moisture Readability is typically one decimal point less than weighing readability. This means if you need moisture readability of 0.001%, you need to purchase a moisture balance with weighing readability of 0.0001%.
Many industries require moisture measurement.
-In the food industry there is great significance in the costs of the wave material, if per ton of raw material 5% contain water,
The cost should be reduced by 5%.
The best test is by moisture scales: take a sample of tens of grams of the raw material
And put in the moisture scales, the scales have a small heating element and they weigh the raw material before and after drying
And perform a calculation of the percentage of water, everything is done automatically.
-In the plastics industry it is important to know the percentage of moisture in the grains of the raw material and whether there is
Need to dry it before feeding.
-Companies that work in flood damage as a result of flooding, check the percentage of water absorbed, in the sand under the floors
And accordingly dries out these areas.
For more information
Primary Manufacturer:
Radwag
-Radwag is the world's leading manufacturer of Balances and Scales.
-Since 1984
-Country of manufacture: Poland
For proper maintenance of scales, an instruction file for cleaning the instruments attached: "Laboratory balance cleaning"